RH Turn
WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
When the turn signal switch is moved to the right position, BCM outputs turn signal from BCM terminal 46, interpreting it as turn signal is ON.
The BCM supplies power
- Through terminal 46
- To front combination lamp RH terminal 2
- Through front combination lamp RH terminal 1
- To grounds E9, E15 and E24, and
- To rear combination lamp RH terminal 3
- Through rear combination lamp terminal 5
- To grounds B117 and B132.
BCM sends signal to combination meter through CAN communication lines and turns on turn signal indicator lamp within combination meter.