Rear Wheel Bearing

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Check that the wheel hub bearing axial end play is within specification as shown.

Fig 1: Checking Wheel Hub Bearing Axial End Play
Courtesy of NISSAN MOTOR CO., U.S.A.
- Axial end play: 0.05 mm (0.002 in) or less
Check that the wheel hub bearing operates smoothly.
Replace the wheel hub assembly if the axial end play exceeds specification, or if the wheel bearing does not turn smoothly. Refer to "REMOVAL AND INSTALLATION ".
CAUTION:
The wheel hub assembly does not require maintenance. If any of the following symptoms are noted, replace the wheel hub assembly.
- Growling noise is emitted from the wheel hub bearing during operation.
- Wheel hub bearing drags or turns roughly.