LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1511 (Brake System) >> Front Disc Brake >> Removal and Installation of Caliper Assembly and Disc Rotor >> Removal

Removal and Installation of Caliper Assembly and Disc Rotor: Removal

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire assemblies using power tool.
  2. Drain brake fluid. Refer to "CHANGING BRAKE FLUID ".
  3. Remove union bolt and torque member bolts using power tool, then remove caliper assembly.
  4. Remove disc rotor.
    • Prior to removing disc rotor, make alignment mark using a marker between the hub and disc rotor.
scientia non olet · About LEMON Manuals