LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1503 (Wiper, Washer & Horn) >> Front Wiper And Washer System >> CONSULT-II Function (IPDM E/R) >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "WIPER" on the "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on the "SELECT DIAG MODE" screen.
  3. Touch "ALL SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU" on "SELECT MONITOR ITEM" screen.
    SIGNALS REFERENCE TABLE

    ALL SIGNALS Monitors all the items.
    MAIN SIGNALS Monitors predetermined items.
    SELECTION FROM MENU Selects and monitors the individual item selected.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
  6. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals