Camber, Caster And Kingpin Inclination

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Camber, caster and kingpin inclination are preset at factory and cannot be adjusted.

Measure the camber, caster and kingpin inclination of both the right and left wheels using attachment Tool and a suitable alignment gauge.

Fig 1: Identifying Attachment Tool And Suitable Alignment Gauge
Courtesy of NISSAN MOTOR CO., U.S.A.
- Camber, caster and kingpin inclination: Refer to " FRONT WHEEL ALIGNMENT (UNLADEN*1) "
If the camber, caster or kingpin inclination is not within specification, inspect the front suspension parts. Replace any damaged or worn out parts.