LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1495 (Engine Mechanical) >> Drive Belts >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine undercover.
  2. Fully loosen each belt. Refer to TENSION ADJUSTMENT . Remove generator and air conditioner compressor belt and then power steering oil pump belt.
    CAUTION: Grease is applied to idler pulley adjusting bolt. Be careful to keep grease away from the belts.
scientia non olet · About LEMON Manuals