LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1494 (Power Supply, Ground & Circuit Elements) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> CONSULT-II Function IPDM E/R >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch "ALL SIGNALS", "MAIN SIGNALS" or "SELECT FROM MENU" on the "DATA MONITOR" screen.
    SIGNALS REFERENCE TABLE

    Item Condition
    ALL SIGNALS All signals will be monitored.
    MAIN SIGNALS Monitors the predetermined item(s).
    SELECT FROM MENU Selects and monitors individual signal(s).
  3. Touch "START".
  4. Touch the required monitoring item on "SELECT ITEM MENU".
  5. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals