LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1494 (Power Supply, Ground & Circuit Elements) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> CONSULT-II Function IPDM E/R >> Active Test >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "ACTIVE TEST" on "SELECT DIAG-MODE" screen.
  2. Touch item to be tested, and check operation.
  3. Touch "START".
  4. Touch "STOP" while testing to stop the operation.
    CONSULT-11 SCREEN DISPLAY DESCRIPTION TABLE

    Test name CONSULT-II screen display Description
    Tail lamp output TAIL LAMP With a certain ON-OFF operation, the tail lamp relay can be operated.
    Rear defogger output REAR DEFOGGER With a certain ON-OFF operation, the rear defogger relay can be operated.
    Front wiper (HI, LO) output FRONT WIPER With a certain operation (OFF, HI ON, LO ON), the front wiper relay (Lo, Hi) can be operated.
    Cooling fan output MOTOR FAN With a certain operation (1, 2, 3, 4), the cooling fan can be operated.
    Lamp (HI, LO, FOG) output LAMPS With a certain operation (OFF, HI ON, LO ON, FOG ON), the lamp relay (Lo, Hi, Fog) can be operated.
    Test name CONSULT-II screen display Description
    Cornering lamp output CORNERING LAMP -
    Horn output HORN With a certain ON-OFF operation, the horn relay can be operated.
scientia non olet · About LEMON Manuals