Removal and Installation for Rear Expansion Valve: Installation
WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- Expansion valve bolts: 4 N.m (0.4 kg-m, 35 in-lb)
- A/C refrigerant pipe to expansion valve bolt: Refer to " COMPONENTS ".
CAUTION:
- Replace the O-rings on the A/C refrigerant pipes with new ones, then apply compressor oil to them when installing them.
- After charging refrigerant, check for leaks