Removal And Installation For Front Expansion Valve: Installation

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Expansion valve bolts: 4 N.m (0.4 kg-m, 35 in-lb)

A/C refrigerant pipe to expansion valve bolt: Refer to , "COMPONENTS ".

CAUTION:

Replace the O-rings on the A/C refrigerant pipes with new ones, then apply compressor oil to them when installing them.
After charging refrigerant, check for leaks