LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Unified Meter And A/C Amp) >> Unified Meter And A/C Amp >> CONSULT-II Function a >> Data Monitor >> Display Item List

Display Item List

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY ITEM LIST

Display item [Unit] MAIN SIGNALS CAN DIAG SUPPORT MNTR SELECTION FROM MENU Contents
SPEED METER [km/h] or [mph] X - X This is the angle correction value after the speed signal from the ABS actuator and electric unit (control unit) is converted into the vehicle speed.
SPEED OUTPUT [km/h] or [mph] X - X This is the angle correction value before the speed signal from the ABS actuator and electric unit (control unit) is converted into the vehicle speed.
TACHO METER [rpm] X - X This is the converted value for the engine speed signal from the ECM.
W TEMP METER [°C] or [°F] X - X This is the converted value for the water temp signal from the ECM.
FUEL METER [lit] X - X This is the processed value for the signal (resistance value) from the fuel gauge.
DISTANCE [km] X - X This is the calculated value for the speed signal from the ABS actuator and electric unit (control unit), the signal (resistance signal) from the fuel gauge and fuel consumption from ECM.
FUEL W/L [ON/OFF] X - X Indicates [ON/OFF] condition of low-fuel warning lamp.
MIL [ON/OFF] - - X Indicates [ON/OFF] condition of malfunction indicator lamp.
SEAT BELT W/L [ON/OFF] [ - X Indicates [ON/OFF] condition of seat belt warning lamp.
BUZZER [ON/OFF] X - X Indicates [ON/OFF] condition of buzzer.
DOOR W/L [ON/OFF] - - X Indicates [ON/OFF] condition of door warning lamp.
HI-BEAM IND [ON/OFF] - - X Indicates [ON/OFF] condition of high beam indicator.
TURN IND [ON/OFF] - - X Indicates [ON/OFF] condition of turn indicator.
OIL W/L [ON/OFF] - - X Indicates [ON/OFF] condition of oil pressure warning lamp.
TCS IND [ON/OFF] - - X Indicates [ON/OFF] condition of TCS OFF indicator lamp.
VDC IND [ON/OFF] - - X Indicates [ON/OFF] condition of VDC OFF indicator lamp.
ABS W/L [ON/OFF] - - X Indicates [ON/OFF] condition of ABS warning lamp.
SLIP IND [ON/OFF] - - X Indicates [ON/OFF] condition of SLIP indicator lamp.
BRAKE W/L [ON/OFF] - - X Indicates [ON/OFF] condition of brake warning lamp. (2) 1
M RANGE SW [ON/OFF] X - X Indicates [ON/OFF] condition of manual mode range switch.
NM RANGE SW [ON/OFF] X - X Indicates [ON/OFF] condition of except for manual mode range switch.
AT SFT UP SW [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift-up switch.
AT SFT DWN SW [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift-down switch.
BRAKE SW [ON/OFF] - - X Indicates [ON/OFF] condition of parking brake switch.
AT-M IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T manual mode indicator.
AT-M GEAR [5-1/1] X - X Indicates [5-1/1] condition of A/T manual mode gear position.
P RANGE IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift P range indicator.
R RANGE IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift R range indicator.
N RANGE IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift N range indicator.
D RANGE IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift D range indicator.
3 RANGE IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift 3 range indicator.
2 RANGE IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift 2 range indicator.
1 RANGE IND [ON/OFF] X - X Indicates [ON/OFF] condition of A/T shift 1 range indicator.
AAT IND [ON/OFF] - - X Indicates [ON/OFF] condition of A/T indicator.
CRUISE IND [ON/OFF] - - X Indicates [ON/OFF] condition of CRUISE indicator.
SET IND [ON/OFF] - - X Indicates [ON/OFF] condition of SET indicator.
CAN CIRC 1 [OK/UNKWN] - X - Displays [OK/UNKWN] condition of the CAN communication judged by each signal input.
CAN CIRC 2 [OK/UNKWN] - X -
CAN CIRC 3 [OK/UNKWN] - X -
CAN CIRC 4 [OK/UNKWN] - X -
CAN CIRC 5 [OK/UNKWN] - X -
CAN CIRC 6 [OK/UNKWN] - X -
CAN CIRC 7 [OK/UNKWN] - X -
CAN CIRC 8 [OK/UNKWN] - X -
CAN CIRC 9 [OK/UNKWN] - X -
CAN CIRC 10 [OK/UNKWN] - X -
CAN CIRC 11 [OK/UNKWN] - X -
CAN CIRC 12 [OK/UNKWN] - X -
CAN CIRC 13 [OK/UNKWN] - X -
CAN CIRC 14 [OK/UNKWN] - X -
CAN 1 STAT [0-40] (3) 2 - X - Displays condition of the CAN communication judged by each signal input.
CAN 2 STAT [0-40] - X -
CAN 3 STAT [0-40] - X -
CAN 4 STAT [0-40] - X -
CAN 5 STAT [0-40] - X -
CAN 6 STAT [0-40] - X -
CAN 7 STAT [0-40] - X -
CAN 8 STAT [0-40] - X -
CAN 9 STAT [0-40] - X -
CAN 10 STAT [0-40] - X -
CAN 11 STAT [0-40] - X -
CAN 12 STAT [0-40] - X -
CAN 13 STAT [0-40] - X -
CAN 14 STAT [0-40] - X -
(1) Any monitored item that does not match the vehicle being diagnosed is deleted from the display automatically

(2) Monitor keeps indicating "OFF" when brake warning lamp is on because of parking brake operation or low brake fluid level.

(3) CAN status indicates the condition of the CAN communication judged by each signal input.

After the system returns to its normal operating condition, every time the ignition switch is cycled (turned OFF from ON), a value will be removed from the counter (i.e. "39" -> "38"--> "37"--> "1"). If a malfunction is detected again, CAN status indicates "40". (Although the system has returned to normal operating condition, "0" is not immediately indicated. To reset, select and press "ERASE" on the "SELF-DIAGNOSIS" screen.)

scientia non olet · About LEMON Manuals