Turn Signal Operation: Notes

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is in the ON or START position, power is supplied

through 10A fuse [No. 1, located in the fuse block (J/B)]
to BCM (body control module) terminal 38 and
to unified meter and A/C amp. terminal 22
through 10A fuse [No. 14, located in the fuse block (J/B)]
to combination meter terminal 23.

Ground is supplied at all times

to BCM (body control module) terminals 49 and 52
to unified meter and A/C amp. terminals 29 and 30 and
to combination meter terminals 10, 11 and 12
through grounds M57, M61 and M79.