LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1278 (Headlamp (For USA)) >> CONSULT-II Function (BCM) >> Work Support >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "HEADLAMP" on "SELECT TEST ITEM" screen.
  2. Touch "WORK SUPPORT" on "SELECT DIAG MODE" screen.
  3. Touch item on "SELECT WORK ITEM" screen.
  4. Touch "START".
  5. Touch "CHANGE SET".
  6. The setting will be changed and "CUSTOMIZING COMPLETED" will be displayed.
  7. Touch "END".
scientia non olet · About LEMON Manuals