CONSULT-II Function (BCM): Notes
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-II executes the following functions by combining data reception and command transmission via the communication line from BCM. Work support, self-diagnosis, data monitor, and active test display.
CONSULT-II FUNCTION (BCM)
| BCM diagnosis part | Check item, diagnosis mode | Description |
|---|---|---|
| HEADLAMP | Work support | Changes the setting for each function. |
| Data monitor | Displays BCM input data in real time. | |
| Active test | Operation of electrical loads can be checked by sending drive signal to them. | |
| BCM | Self-diagnosis | BCM performs self-diagnosis of CAN communication. |