3. Check Security Indicator Lamp Power Supply Circuit

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect security indicator lamp.
Check voltage between security indicator lamp connector M34 terminal 1 and ground.
1. 1 (R/W) - Ground: Battery voltage

OK or NG

OK >> GO TO 4
NG >> Repair or replace harness.

Fig 1: Checking Voltage Between Security Indicator Lamp Connector M34 Terminal 1 & Ground

Courtesy of NISSAN MOTOR CO., U.S.A.