2. Perform Initialization With Consult-II
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Perform initialization with CONSULT-II. Re-register all NATS ignition key IDs.
For initialization, refer to CONSULT-II Operation Manual for NATS-IVIS/NVIS.
NOTE:
If the initialization is not completed or malfunctions, CONSULT-II shows message on the screen.
Can the system be initialized?
- Yes >>
- Start engine. (END)
- (System initialization had not been completed. Ref. part No. F )
- No >>
- ECM is malfunctioning.
- Replace ECM. Ref. part No. B
- Perform initialization with CONSULT-II.
For initialization, refer to CONSULT-II Operation Manual for NATS-IVIS/NVIS.