LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1273 (Hood) >> Hood >> Removal and Installation of Hood Assembly

Removal and Installation of Hood Assembly

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Hood Latch And Stopper Screws
G00341143Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Remove the hinge mounting nuts on the hood to remove the hood assembly.

Install in the reverse order of removal.

NOTE: Align the hood. Fitting Adjustment ".
scientia non olet · About LEMON Manuals