LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1265 (Maintenance) >> Engine Maintenance >> Drive Belts >> Checking Drive Belts >> Belt Deflection and Tension

Belt Deflection and Tension

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
BELT DEFLECTION AND TENSION CHART

- Deflection adjustment Unit: mm (in) Tension adjustment(1) Unit: N (kg-f, lb-f)
Used belt New belt Used belt New belt
Limit After adjustment Limit After adjustment
Generator and air conditioning compressor 7(0.28) 4.2-4.6 (0.17 - 0.18) 3.7 - 4.1 (0.15 - 0.16) 294 (30, 66) 730 - 818 (74.5 - 83.5, 164 - 184) 838 - 926 (85.5 - 94.5, 188 - 208)
Power steering pump 11(0 43) 7.3 - 8.0 (0.29 - 0.30) 6.5 - 7.2 (0.26 - 0.28) 196 (20, 44) 495 - 583 50.5 - 59.5, 111 - 131) 603 - 691 (61.5 - 70.5, 135.6 - 155.4)
Applied pushing force 98 N(10kg-f, 22 lb-f) -
(1) If belt tension gauge cannot be installed at check points shown, check drive belt tension at different location on the belt.