LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1259 (Horn) >> Horn >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten horn bolt to specified torque.

    Horn bolt: 17 N.m (1.7 kg-m, 13 ft-lb) 

  2. Reconnect horn connector.
  3. Install front bumper.
scientia non olet · About LEMON Manuals