Low Beam Operation
WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
When the lighting switch is turned to headlamp "ON" (2ND) position, "LOW BEAM" (B) position, power is supplied:
- from lighting switch terminal 7
- to RH headlamp terminal LO.
Ground is supplied:
- to RH headlamp terminal E
- through body grounds E7 and E37.
Also, when the lighting switch is moved to headlamp "ON" (2ND) position, "LOW BEAM" (B) position, power is supplied:
- from lighting switch terminal 10
- to LH headlamp terminal LO.
Ground is supplied:
- to LH headlamp terminal E
- from daytime light control unit terminal 7
- through daytime light control unit terminal 9
- through body grounds E7 and E37.
With power and ground supplied, the low beam headlamps illuminate.