LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1195 (Vehicle Security (Theft Warning) System) >> Vehicle Security (Theft Warning) System >> CONSULT-II Inspection Procedure >> "Theft War ALM"

"Theft War ALM"

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
    Fig 1: Identifying Brake Pedals
    G00851694Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Connect "CONSULT-II" to the data link connector.
  3. Turn ignition switch ON.
    Fig 2: Identifying Ignition Switch On
    G00851695Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Touch "START".
  5. Touch "SMART ENTRANCE".
    Fig 3: Smart Entrance Scan Tool Display
    G00851696Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "THEFT WAR ALM".
    Fig 4: Theft War Alm Scan Tool Display
    G00851697Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Select diagnosis mode.

"DATA MONITOR", "ACTIVE TEST" and "WORK SUPPORT" are available.

Fig 5: Data Monitor Scan Tool Display
G00851698Courtesy of NISSAN MOTOR CO., U.S.A.