LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (Seat Belt System) >> Basic Inspection >> Seat Belt Inspection >> Seat Belt Retractor On-Vehicle Check >> ALR Function Stationary Check

ALR Function Stationary Check

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull out entire length of seat belt from retractor until a click is heard.
  2. Retract the belt partially. A clicking noise should be heard as the belt retracts indicating that the retractor is in the Automatic Locking Retractors (ALR) mode.
  3. Grasp the seat belt and try to pull out of the retractor. The belt must lock and not extend any further. If NG, replace the retractor assembly.
  4. Allow the entire length of the belt to retract to cancel the automatic locking mode.
scientia non olet · About LEMON Manuals