LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1174 (Automatic Transaxle - Re4F03B) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (With GST)

How To Erase DTC (With GST)

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait at least 5 seconds and then turn it "ON" (engine stopped) again.
  2. Perform TCM Self-diagnostic Procedure. Refer to "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) ".

    (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)

  3. Select Mode 4 with Generic Scan Tool (GST). For details, refer to HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFO .
scientia non olet · About LEMON Manuals