Baulk ring clearance

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Press the baulk ring against the cone, and measure the clearance between the baulk ring and cone as shown. If the measurement is below the specified limit, replace it with a new one.
Baulk ring to gear clearance

Standard: 0.95 - 1.4 mm (0.0374 - 0.055 in)

Limit value: 0.7 mm (0.028 in)

Fig 1: Checking Baulk Ring Clearance
Courtesy of NISSAN MOTOR CO., U.S.A.