LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1173 (Manual Transaxle - RS6F51H) >> Reverse Idler Shaft And Gears >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the reverse idler gear adjusting shim.
  2. Remove the reverse idler gear (rear), reverse coupling sleeve and insert spring simultaneously.
  3. Remove the reverse idler gear needle bearing.
  4. Remove the thrust needle bearing.
  5. Remove the reverse baulk ring.
  6. Remove the reverse idler gear (front).
  7. Remove the reverse idler gear needle bearing.
  8. Remove the thrust needle bearing.
  9. Pull off the locking pin from the reverse idler shaft.
scientia non olet · About LEMON Manuals