M/T Oil: Replacement: Filling
WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Remove filler plug. Fill with new oil until oil level reaches the specified limit near filler plug mounting hole.
Oil grade: API GL-4, Viscosity SAE 75W-85
Capacity (approximately): 2.3 l (2 3/8 US qt, 2 lmp qt)
- After refilling oil, check oil level. Assemble a new gasket on to filler plug, then install it in transaxle body.
Filler plug: 30 - 39 N-m (3.1 - 4.0 kg-m, 23 - 28 ft-lb)
CAUTION: Do not reuse gasket.