M/T Oil: Replacement: Filling
WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Remove filler plug. Fill with new oil until oil level reaches the specified limit near filler plug mounting hole as shown.
Oil grade: API GL-4, Viscosity SAE 75W-85
Capacity (approximately): 3.0 l (3 1/8 US qt, 2 5/8 Imp qt)
- After refilling oil, check oil level as shown.
- Install the filler plug in the transaxle case using a new gasket.
Filler plug: 10 - 19 N.m (1.0 - 2.0 kg-m, 87 - 173 in-lb)
CAUTION: Do not reuse gasket.