M/T Oil: Replacement: Draining
WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine and let it run to warm up the transaxle.
- Stop the engine. Remove drain plug and drain oil.
- Set a gasket on the drain plug and install it on the transaxle.
Drain plug: 10 - 19 N.m (1.0 - 2.0 kg-m, 87 - 173 in-lb)
CAUTION: Do not reuse gasket.