LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1171 (Clutch System - RS6F51H) >> Piping >> Removal

Section 1171 (Clutch System - RS6F51H): Piping: Removal

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine air cleaner and air duct. Refer to AIR CLEANER AND AIR DUCT .
  2. Drain the brake fluid from the clutch hydraulic system.
    CAUTION: Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.
  3. Remove the flare nut from the operating cylinder body using a flare nut wrench.
  4. Remove the union bolt and two copper washers attaching the clutch hose from the operating cylinder. Discard the two copper washers.
  5. Remove the clutch hose from the bracket by removing the lock plate.
scientia non olet · About LEMON Manuals