LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1171 (Clutch System - RS6F51H) >> Clutch Master Cylinder >> Removal

Clutch Master Cylinder: Removal

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the brake fluid from the clutch hydraulic system.
    CAUTION: Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.
  2. Remove the clutch tube flare nut using a flare nut wrench.
  3. Remove the reservoir hose.
  4. Remove the snap pin from the clevis pin and remove the clutch pedal from the clevis.
  5. Unscrew the master cylinder assembly nuts and reservoir tank bracket nuts to remove the master cylinder assembly.
scientia non olet · About LEMON Manuals