LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1170 (Clutch System - RS5F70A) >> Operating Cylinder >> Installation

Operating Cylinder: Installation

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:
  • Install the clutch hose without twisting it.
  • The two copper washers for the union bolt cannot be reused. Use two new copper washers for installation.
  • After finishing the installation, bleed the air from the clutch hydraulic system. Refer to "BLEEDING PROCEDURE ".