LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1170 (Clutch System - RS5F70A) >> Operating Cylinder >> Assembly

Operating Cylinder: Assembly

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: To assemble the operating cylinder use the specified rubber grease and rubber lubricant. Refer to RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS .
  1. Apply rubber lubricant to the overall inside surface of the operating cylinder body.
  2. Install the air bleeder, tighten to specification.

    Air bleeder: 6 -10 N-m (0.6 -1.0 kg-m, 52 - 87 in-lb) 

  3. Install the piston spring with the tapered spring end pointing toward the piston cup.
  4. Apply rubber grease and install the piston cup.
  5. Apply rubber grease and install the piston.
  6. Install the push rod.
  7. Apply rubber grease and install the dust cover.
scientia non olet · About LEMON Manuals