LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1165 (Engine Control System - Qr25DE) >> DTC P1564: ASCD Steering Switch >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 10 seconds.
  4. Press "CRUISE" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  5. Press "ACCEL/RES" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  6. Press "COAST/SET" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  7. Press "CANCEL" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  8. If trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".