LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1165 (Engine Control System - Qr25DE) >> DTC P0444, P0445: EVAP Canister Purge Volume Control Solenoid Valve >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> Testing Condition: >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 13 seconds.
  4. If 1st trip DTC is detected, GO TO "DIAGNOSTIC PROCEDURE ".
    Fig 1: Selecting Data Monitor Mode With Consult-II
    G00777955Courtesy of NISSAN MOTOR CO., U.S.A.