LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1165 (Engine Control System - Qr25DE) >> DTC P0102, P0103: MAF Sensor >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> Procedure For DTC P0102 >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    5. Fig 1: Selecting Data Monitor Mode With Consult-II
    G00776934Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals