LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Engine Controls Self-Diagnostics - Pathfinder) >> Self-Diagnostic System >> Fail-Safe Modes >> DTC P1335: Crankshaft Position Sensor (REF)

DTC P1335: Crankshaft Position Sensor (REF)

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Compression TDC signal (120 degree signal) is controlled by CMP sensor (PHASE) signal and CKP sensor (POS) signal. In fail safe mode, ignition timing will be delayed 0-2 degrees.

scientia non olet · About LEMON Manuals