Possible Causes
WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
ECM illuminates MIL and sets DTC P0134 when voltage from Bank 1 HO2S 1 is constantly about .3 volt. ECM illuminates MIL and sets DTC P0154 when voltage from Bank 2 HO2S 1 is constantly about .3 volt. Possible causes are:
- HO2S 1 signal circuit open or shorted.
- Poor, loose, corroded or damaged terminal connections.
- Defective HO2S 1.