Possible Cause
WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
ECM illuminates MIL and sets DTC P0112 when an excessively low voltage from IAT sensor is sent to ECM. ECM illuminates MIL and sets DTC P0113 when an excessively high voltage from IAT sensor is sent to ECM. Possible causes are:
- IAT sensor circuit open or shorted.
- Poor, loose, corroded or damaged terminal connections.
- Defective IAT sensor.