LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P2127 Or DTC P2128: App Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. Before performing the following procedure, confirm that battery voltage is more than 10V at idle.

For DTC confirmation procedure, see Fig 1.

Fig 1: Identifying DTC Confirmation Procedure For DTC P2127 Or P2128: APP Sensor
G00266191Courtesy of NISSAN MOTOR CO., U.S.A.