DTC Confirmation Procedure (With CONSULT-II - 2.5L)

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

For DTC confirmation procedure, see Fig 1.

Fig 1: Identifying DTC Confirmation Procedure For DTC P0441: EVAP Control System (2.5L)

Courtesy of NISSAN MOTOR CO., U.S.A.