RH Turn
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
When the turn signal switch is moved to the right position, BCM (body control module) outputs turn signal from BCM (body control module) terminal 46, interpreting it as turn signal is ON. The BCM supplies power
- from terminal 46
- to front combination lamp RH terminal 2
- through front combination lamp RH terminal 1
- to grounds E9, E15 and E24, and
- to rear combination lamp RH terminal 3
- through rear combination lamp terminal 5
- to grounds B117 and B132.
BCM (body control module) sends signal to combination meter through CAN communication lines, and turns on turn signal indicator lamp within combination meter.