LH Turn
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
When the turn signal switch is moved to the left position, BCM (body control module) outputs turn signal from ) BCM (body control module) terminal 45, interpreting it as turn signal is ON. The BCM supplies power
- from terminal 45
- to front combination lamp LH terminal 2
- through front combination lamp LH terminal 1
- to grounds E9, E15 and E24, and
- to rear combination lamp LH terminal 3
- through rear combination lamp LH terminal 5
- to grounds B7 and B19.
BCM (body control module) sends signal to combination meter through CAN communication lines, and turns on turn signal indicator lamp within combination meter.