LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1083 (Headlamp (For USA)) >> Headlamp (For USA) >> CONSULT-II Functions (IPDM E/R) >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch "ALL SIGNALS", "MAIN SIGNALS" or "SELECT FROM MENU" on the "DATA MONITOR" screen.
    SIGNAL SPECIFICATION CHART - DATA MONITOR

    ALL SIGNALS All items will be monitored.
    MAIN SIGNALS Monitor the predetermined item.
    SELECT FROM MENU Select any item for monitoring.
  3. Touch "START".
  4. Touch the required monitoring item on "SELECT ITEM MENU". In "ALL SIGNALS", all items are monitored. In "MAIN SIGNALS", predetermined items are monitored.
  5. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
scientia non olet · About LEMON Manuals