LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1083 (Headlamp (For USA)) >> Headlamp (For USA) >> CONSULT-II Functions (IPDM E/R) >> Active Test >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
  2. Touch item to be tested, and check operation.
  3. Touch "START".
  4. Touch "STOP" while testing to stop the operation.
DESCRIPTION CHART - ACTIVE TEST

Test item CONSULT-II screen display Description
Headlamp relay (HI, LO) output LAMPS Allows headlamp relay (HI, LO) to operate by switching operation (OFF, HI ON, LO ON) at your option (Head lamp high beam repeats ON-OFF every 1 second).
Front fog lamp relay (FOG) output Allows fog lamp relay (FOG) to operate by switching operation ON-OFF at your option
Tail lamp relay output TAIL LAMP Allows tail lamp relay to operate by switching operation ON-OFF at your option
Cornering lamp relay (RH, LH) output CORNERING LAMP Allows cornering lamp relay (RH, LH) to operate by switching operation ON-OFF at your option
scientia non olet · About LEMON Manuals