LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1081 (Manual HVAC System) >> Intake Door Motor >> Removal and Installation >> Passenger Side

Passenger Side

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front heater and cooling unit assembly. Refer to "FRONT HEATER AND COOLING UNIT ASSEMBLY ".
  2. Remove the steering member from the front heater and cooling unit assembly.
  3. Disconnect the intake door motor electrical connector.
  4. Remove the three screws and remove the intake door motor.
  5. Installation is in the reverse order of removal.
scientia non olet · About LEMON Manuals