Removal and Installation for High-pressure Pipe: Removal
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Reposition the IPDM E/R aside.
- Remove the windshield washer fluid bottle filler neck.
- Reposition the coolant reservoir tank aside.
- Reposition the power steering fluid reservoir aside.
- Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
- Remove the high-pressure pipe. Refer to
"COMPONENTS ".CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.