LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Automatic HVAC System) >> Refrigerant Lines >> Removal and Installation for Front Expansion Valve >> Removal

Removal and Installation for Front Expansion Valve: Removal

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge the refrigerant. Refer to HFC-134A (R-134A) SERVICE PROCEDURE .
  2. Remove the front heater and cooling unit assembly. Refer to "FRONT HEATER AND COOLING UNIT ASSEMBLY ".
  3. Remove the cooler grommet.
  4. Remove the expansion valve.
    Fig 1: Identifying Cooler Grommet And Expansion Valve
    G00866921Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals