Diagnostic Procedure
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK STARTING SYSTEM
Check starting system. Refer to STARTING SYSTEM .
OK or NG
- OK: GO TO 2.
- NG: Repair or replace damaged parts.
- CHECK CONTROL LINKAGE
Check the control linkage.
- Refer to "CONTROL CABLE ADJUSTMENT ".
OK or NG
- OK: GO TO 3.
- NG: Adjust control linkage. Refer to "CONTROL CABLE ADJUSTMENT ".
- CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis.
Do the self-diagnostic results indicate PNP switch?
- YES: Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH ".
- NO: INSPECTION END