LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1056 (Automatic Transaxle Overhaul & Diagnostics) >> Re5F22A >> On Board Diagnostic (OBD) System >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC >> How to erase DTC (with GST)

How to erase DTC (with GST)

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait at least 10 seconds and then turn it "ON" (engine stopped) again.
  2. Erase DTC with TCM. Refer to "ERASE SELF-DIAGNOSIS ". (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
  3. Select Mode 4 with Generic Scan Tool (GST). For details, refer to "GENERIC SCAN TOOL (GST) FUNCTION ".
scientia non olet · About LEMON Manuals