LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 1056 (Automatic Transaxle Overhaul & Diagnostics) >> Re4F04B >> DTC PO750 Shift Solenoid Valve A >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode for "ENGINE" with CONSULT-II.
    Fig 1: CONSULT-II Display - SELECT SYSTEM
    G00740016Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Start engine.
    Fig 2: CONSULT-II Display - SELECT DIAG MODE
    G00740017Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Drive vehicle in D position and allow the transmission to shift 1 --> 2 ("GEAR").
scientia non olet · About LEMON Manuals